miter saw for baseboards

Best Miter Saw for Crown Molding 2021 – With Ratings and Reviews

Recommended Miter Saw for Crown Molding 2021

 

The Miter saw is a must have tool for many DIYers and pros alike but when it comes to crown moldings there are a number of factors that come into play when choosing the best miter saw for the job. Crown moldings come in many different types and dimensions such as

  • Plaster
  • Solid Wood
  • MDF (Medium-Density Fiberboard)
  • Polyurethane

and many more.

With so many types of crown moldings you”ll need the right miter saw for the right job.

Here are the top 5 miter saw for crown moldings and projects alike.

1. DEWALT Miter Saw, Single Bevel, Compound, 10-Inch, 15-Amp (DWS713)

The Dewalt Miter Saw 10 inch is a compound Miter saw perfect for cutting crown moldings. It also has a 15 amp motor to drive 5, 000 RPM, delivering Extended power and durability. Features stainless steel Miter detent plate and turn knob lock that provide repeatable accuracy and durability with easy adjustments. Tall sliding fences support 4-1/2 in. Of crown molding vertically nested. Lightweight design and built-in carry handle for portability.

Review:

I am very satisfied with the miter saw. I researched a lot a decided to buy this model from Dewalt, and it turned out to be the better choice. I checked also the alignment and calibration of the blade, all was perfect and no adjustments were needed.

Weight: 38.1 pounds
Dimensions: 24.8 x 20 x 17.72 inches

Rating
★★★★★

2. Genesis GMS1015LC 15-Amp 10-Inch Compound Miter Saw with Laser Guide and 9 Positive Miter Stops

Genesis GMS1015LC 15-Amp 10-Inch Compound Miter Saw is one of the best choices for cutting crown molding. you can make beveled cuts up to 45 degrees left. Use compound cutting for crown molding, shadow boxes, Picture frames, and more | the Genesis compound Miter saw is inexpensive and versatile! The Genesis compound Miter Saw is also equipped with laser cutting guide for quicker alignment and improved accuracy so you’ll always know exactly where the cut will be ahead of time. Electric brake stops the blade in seconds for added safety and Arbor lock for quick blade changes Includes: 60T Carbide blade installed, hold down Clamp, dust bag, Two extension wings, blade wrench and two AAA batteries for laser Make precision miter cuts up to 45 degrees left and right, with 9 position stops at commonly used angles.

Review:

I’ve had this for several months and it gets heavy use on the weekends. So far it’s has been worth every penny. The laser is nice, it’s good size. I do wish it slid front to back. Easy to make angled cuts. I like it. I would buy it again and would recommend this saw to all. You can’t beat it for the price.

best miter saw for baseboards

Weight: 31.5 pounds
Dimensions: 19.5 x 16.25 x 15 inches

Rating
★★★★★

3. DEWALT Sliding Compound Miter Saw, 12-Inch

The DEWALT DWS779 12″ Sliding compound Miter saw features a powerful 15 amp that’s great for cutting crown molding and a 3,800 RPM motor that delivers extended power and durability. It has a super-efficient dust collection system that captures over 75 percent of dust generated. This miter saw also offers an exclusive back fence design which cuts up to 2×14 dimensional lumber at 90° and 2×12 at 45°. It’s a Dewalt product so you know it will be durable and function well for years to come.

Review:

I am a big dewalt fan, and the 12″ chop saw continues the that legacy. great price from amazon! looked around and did lots of price shopping and found that the price from amazon was the best. the saw is heavy, so I built a portable work bench so I eliminated that obstacle. highly recommended!

miter saw for baseboard replacement

Item Weight: 56 pounds
Dimensions: 21 x 17 x 17 inches

Rating
★★★★★

4. CRAFTSMAN V20 7-1/4-Inch Sliding Miter Saw Cordless System

The Craftsman V20 7-1/4-Inch Sliding Miter Saw is part of the V20 cordless system. 7-1/4in. V20 20V max miter saw has a powerful 3,800 RPM motor for cutting 2x dimensional hardwoods, baseboard and trim boards with ease. The slide capacity allows for 8 in. cross cut at 90 degrees and 5.5 in. This saw is also the lightest on our list with a weight of only 21.8 lbs. The side carry handles make this unit extremely portable.

Review:

I purchased this product to avoid having to lug around a heavier 10″ chop saw with stand. This cordless saw is amazing. Appreciated that the blade and fence were square out of the box which is not always the case with a new tool. It’s lightweight and cut through 1 1/2″ oak trim boards like nothing. A 4.0 amp battery is included in the kit and only took 45 minutes to fully charge with the supplied fast charger. It’s advisable to buy another battery so that you can complete long projects without interruption. Finally, this motor is much quieter than a corded saw but without any appreciable loss of power. On first use, it made multiple 45 and 90 degree cuts accurately while using the LED light/blade shadow. Overall, a great little saw for the price.

craftsman miter saw for baseboards

Weight: 21.8 pounds
Dimensions: 25.5 x 18.9 x 14.2 inches

Rating
★★★★★

5. Bosch Power Tools GCM12SD – 15 Amp 12 Inch Corded Dual-Bevel Sliding Glide Miter Saw with 60 Tooth Saw Blade

Bosch Power Tools GCM12SD has a patented axial glide system that allows wider cross cuts and better alignment while also being compact; This saves you 12 inch of valuable work space; Bosch glide miter saw also offers unmatched smoothness of cuts perfect for crown molding jobs The GCM12SD miter saw also provides easy adjustments with a large easy to read uniform bevel and stainless steel miter scales with marked detentes and roof pitch angles; Bevel detents: 0, 33.9 degree, 45 degree left/right for accurate cuts.

Review:

This saw is amazing. I am not a professional woodworker, just a hobbyist. I figured I would invest in a good quality saw that hopefully I will never have to replace. I am blown away by the quality and engineering. Some people have said dust collection int the best, and I guess i could agree; but its not bad by any means. Best saw I have ever used.

Weight: 21.8 pounds
Dimensions: 25.5 x 18.9 x 14.2 inches

Rating
★★★★★

Cutting Baseboards with a Miter Saw

Cutting crown moldings are different than cutting through a 2×4 or other project that don’t need a nice smooth finish. Utilizing the proper saw and blade can help make the job a success. It’s important to have a multistep process to ensure accuracy and to streamline the process. The proper cut is one of the most critical parts of the installation process.

We hope our list of miter saws helps you make the right choice for your upcoming baseboard projects!

Related Products

Avatar
Matt McWilliams
matt@mcwilliamsmedia.com

Hi there! My name is Matt and I write for Expert Home Report. I enjoy writing about everything related to home improvement, home tips and DIY. In my spare time, I'm either spending time with my family, doing a DIY project or learning a new skill.